LiPol Battery's Logolipol battery co. ltdDeutsch | Italiano | Online Shop

 

lipo battery application

LiPo Battery LP603048 3.7V 900mAh for Vehicle Gauging

  • Vehicle Gauging can accurately measure the performance of the vehicle to form a critical diagnosis, to solve the vehicle in the course of the existence of irregular acceleration, driving vibration, driving height tilt, torque steering wheel angle imbalance . High-capacity and high-rate lipo battery LP603048 3.7V 900mAh can provide continuous long-term operation of the vehicle Guaging and activate the "memory" automatically after the data transfer to the display and save, improve vehicle performance, Stable and safe driving without obstacles.Moreover, even in the floating operation to charge, but also to a certain voltage and capacity in the state of automatic power-off, to avoid over-charging on the lipo battery and instrument losses.
  • On the other hand, it can also be used to indicate the number of changes in vehicle measurement angle and data processing, especially in the future car lift will be an unlimited beneficial use. The demand for lipo battery will also increase with the application of vehicle measurement equipment. At present, both the vehicle designers and manufacturers or vehicle maintenance service personnel, vehicle measurement instruments are essential to high-tech precision measurement tools.

Characteristics
- high measuring accuracy
- power supplied by customary lipo battery
- lipo battery charger
- easiest handling

Technical data
- CE certificate, Protection IP65, MSDS, IEC62133, UN38.8
- Power supply: 4.8V – 6V, 0.8W
- Angle measuring range: +/- 15°, accuracy +/- 0.1°
- Equipment: USB-interface and serial R232 for data transfer
- LiPo battery charger
- Measurements (in mm): L x W x H: 450 x 380 x 120 (in the case) app. 205 x 100 x 70 (without case)
- Packing measurements (in mm): L x W x H: 455 x 400 x 120

Battery type LiPo Battery
Part Number LP603048
Voltage @ Capacity 3,7V @ 900mAh
Configuration 1S1P
Wires AWG 28, 50mm x 2pcs
Connector NO
Protection Circuit Overdischarge Trip Voltage 3.0V
Thermistor (NTC) NO
Dimension 48 x 30 x 6,0mm
Charge Temperature 0°C to +45°C
Disharge Temperature -20°C to +60°C
Storage Temperature -20°C to +45°C

 

Similar batteries:

LP403048 3,7V@400mAh 48 x 30 x 4,0mm

LP403448 3,7V@800mAh 48 x 34 x 4,0mm

LP503450 3,7V@850mAh 50 x 34 x 5,0mm

LP603450 3,7V@1000mAh 50 x 34 x 6,0mm

 

Fill out my online form.

© 2002 - 2024 LiPol Battery Co., Ltd. All Rights Reserved